Colorlight i5A-907 Receiving Card

Colorlight i5A-907 Receiving Card  is specially designed for the compact and portable LED displays, such as LED color screen or casting aluminum cabinet, etc. It inherits all the advantages and features i5A series had, adopts a new generation image processing core, and greatly improve the display effect; adopts a new generation of system architecture, and possesses more intelligent function and more stable system. Make its size and interfaces perfectly suit for LED color screen and casting aluminum display.

Description

colorlight logo

Colorlight i5A-907 Receiving Card

Colorlight i5A-907 Receiving Card

 

Overview

Colorlight i5A-907 Receiving Card is usually used for the LED video walls, small spacing LED display, LED car screen due to the smaller size.

Colorlight i5A-907 Receiving Card

Features

  • Tiny size, special designed for the compact structure designs, like color screen and casting aluminum cabinet.
  • Power supply from pin board without the need of external power supply, enhance hardware stability.
  • New processing core, perfect in display effect.
  • High refresh rate, high gray scale and high brightness with conventional chips.
  • Perfect performance under lower grayscale status.
  • Better detail processing: Partial dark at row, reddish at low gray, shadow problems can be solved.
  • Support the effective display at first grayscale value.
  • Support 14 bits high-precision point-by-point calibration in the Brightness and chromaticity.
  • Support conventional chips, PWM chips and lighting chips, etc.
  • Support any scan mode from static to 1/32 scan.
  • Support any pumping point and data arbitrary offset, and realize various freeform display, spherical display, diamond display, creative display, etc.
  • Support 16 groups RGBR’ signal output and 24 groups RGB in maximum.
  • Large load capacity.
  • Advanced design, high quality components, rigorous aging test, zero malfunction of final products.
  • Wide working voltage range with DC 3.3 -6V.
  • Support dual receiving card backup, loop backup, and dual-machine backup, etc.
  • Compatible with S series Sender, Z series Sender and C series Sender, etc.

Specifications

Control system parameters
Sending device S series Sender, Z series Sender and C Series Sender, etc.
Control area of every card Full-color: 256*256 Pixels, for special applications the column can be extended to 1024 pixels
Calibration area of every card 256*256 pixels
Cascade control area of the largest regional 65536*65536 pixels
Cascade card number 65536 PCS
Network port exchange Support, arbitrary use
Synchronization Nanosecond synchronization between cards
Display Quality
Refresh rate for conventional chip Static: 64*64, up to 16000Hz

1/8 scan: 128*128, up to 10000Hz

Serial frequency 0.2MHz-41.7MHz
Gray Level Maximum 65536 levels
Minimum unit of OE values 8ns, 8ns multiples steps
Blanking Circuit Support CD4051 blanking circuit
Gray scale compensation Each level grayscale compensate separately
Display module compatibility
Chip supports Support conventional chips, PWM chips, lighting chips and other mainstream chips
PWM chip supports Support hundreds of different specifications of the PWM chip, such as MBI, MY, SUM, etc.
Scan mode Conventional mode and high refresh rate mode to support refresh rate multiplied
Scan type Support static sweep to 1/32 scan
module specifications Support Support 4096 pixels within any row, any column
The direction of the cable Support route from left to right, from right to left, from top to bottom, from bottom to top.
Data Sets 16 groups RGBR’ parallel data; 24 groups RGB parallel data
Data folded Support to fold on the same or opposite direction, which improve refresh rate significantly
Module snapshot Support any pumping point
Data serial transmission RGB, R8G8B8, R16G16B16, etc.
Compatible device and interface type
Communication distance UTP cable≤140M

CAT6 cable≤170M

Optic fiber: Single Mode Fiber Transceiver≤20KM

Multi-Mode Fiber Transceiver ≤550M (Use RP Repeater to extend unlimited)

Compatible with transmission equipment Gigabit switch, fiber transceiver, optical switches
DC power interface Wire terminal or HUB board
HUB Interface Type Refer to signal interface definition below
Physical parameters
Size 137* 48mm
Input voltage DC 3.3V-6V
Rated current 0.6A
Rated power 3W
Storage and transport temperature -50℃ to 125℃
Operating Temperature -25℃ to 75℃
Body static resistance 2KV
Weight 70g
Monitoring function (in conjunction with multi-function card)
Monitoring functions Real time monitoring environment information like temperature, humidity, smoke
Remote control Support for relay switch to turn on/off the power supply of equipment remotely
Pixel level calibration
Brightness calibration Support
Chromaticity calibration Support
Other features
Hot backup Support loop backup and dual-machine backup
Shaped screen Support various freeform display, spherical display, creative display, etc. through the data arbitrary offset

Hardware

No. Name function note
1 Network port A RJ45,For transmitting data signals The dual network ports can achieve import/export at random, which can be identified in an intelligent way by the system.
2 Network port B RJ45,For transmitting data signals
3 External interfaces For indicator light and test button
4 Indicator Light For power indicator light and signal transmission status Red for power

Green for signal

5 Test Button The attached test procedures can achieve four kinds of monochrome display (red, green, blue and white), as well as horizontal, vertical and other display scan modes
6 Power Connect DC 3.3~6V power supply for the receiving card
7 Signal output J1 Connect to the LED module, interface definition shown below
8 signal output J2 Connect to the LED module, interface definition shown below
9 signal output J3 Connect to the LED module, interface definition shown below
10 signal output J4 Connect to the LED module, interface definition shown below
11 signal output J5 connect to the LED module, same definition as J1

2. Signal output definitions

i5A-907 has five 26P data output interface, and J5 and J1 output the same data. J5 is a horizontal interface, for the special structure using.

i5A-907 supports different work modes, and 26P output interface definitions are different in each work mode, which shown as follows:

2.1 Standard Mode (Default Mode)

JI/J5 J2 J3 J4
1 A B 2 1 A B 2 1 A B 2 1 A B 2
3 OE LAT 4 3 OE LAT 4 3 OE LAT 4 3 OE LAT 4
5 CLK VCC 6 5 CLK VCC 6 5 CLK VCC 6 5 CLK VCC 6
7 C D 8 7 C D 8 7 C D 8 7 C D 8
9 R1 G1 10 9 R5 G5 10 9 R9 G9 10 9 R13 G13 10
11 R1′ B1 12 11 R5′ B5 12 11 R9′ B9 12 11 R13′ B13 12
13 GND R2 14 13 GND R6′ 14 13 GND R10 14 13 GND R14 14
15 G2 R2′ 16 15 G6 R6′ 16 15 G10 R10′ 16 15 G14 R14′ 16
17 B2 R3 18 17 B6 R7 18 17 B10 R11 18 17 B14 R15 18
19 G3 GND 20 19 G7 GND 20 19 G11 GND 20 19 G15 GND 20
21 R3′ B3 22 21 R7′ B7 22 21 R11′ B11 22 21 R15′ B15 22
23 R4 G4 24 23 R8 G8 24 23 R12 G12 24 23 R16 G16 24
25 R4′ B4 26 25 R8′ B8 26 25 R12′ B12 26 25 R16′ B16 26

2.2 20 Groups Mode

JI/J5 J2 J3 J4
1 A B 2 1 A B 2 1 A B 2 1 A B 2
3 OE LAT 4 3 OE LAT 4 3 OE LAT 4 3 OE LAT 4
5 CLK VCC 6 5 CLK VCC 6 5 CLK VCC 6 5 CLK VCC 6
7 C D 8 7 C D 8 7 C D 8 7 C D 8
9 E R1 10 9 E R6 10 9 E R11 10 9 E R16 10
11 G1 B1 12 11 G6 B6 12 11 G11 B11 12 11 G16 B16 12
13 GND R2 14 13 GND R7 14 13 GND R12 14 13 GND R17 14
15 G2 B2 16 15 G7 B7 16 15 G12 B12 16 15 G17 B17 16
17 R3 G3 18 17 R8 G8 18 17 R13 G13 18 17 R18 G18 18
19 B3 GND 20 19 B8 GND 20 19 B13 GND 20 19 B18 GND 20
21 R4 G4 22 21 R9 G9 22 21 R14 G14 22 21 R19 G19 22
23 B4 R5 24 23 B9 R10 24 23 B14 R15 24 23 B19 R20 24
25 G5 B5 26 25 G10 B10 26 25 G15 B15 26 25 G20 B20 26

2.3 24 Groups Mode

Include A and B scan signal;For 1/4~1/32, there need a serial decoding circuit as shown below.

JI/J5 J2 J3 J4
1 A B 2 1 A B 2 1 A B 2 1 A B 2
3 OE LAT 4 3 OE LAT 4 3 OE LAT 4 3 OE LAT 4
5 CLK VCC 6 5 CLK VCC 6 5 CLK VCC 6 5 CLK VCC 6
7 R1 G1 8 7 R7 G7 8 7 R13 G13 8 7 R19 G19 8
9 B1 R2 10 9 B7 R8 10 9 B13 R14 10 9 B19 R20 10
11 G2 B2 12 11 G8 B8 12 11 G14 B14 12 11 G20 B20 12
13 GND R3 14 13 GND R9 14 13 GND R15 14 13 GND R21 14
15 G3 B3 16 15 G9 B9 16 15 G15 B15 16 15 G21 B21 16
17 R4 G4 18 17 R10 G10 18 17 R16 G16 18 17 R22 G22 18
19 B4 GND 20 19 B10 GND 20 19 B16 GND 20 19 B22 GND 20
21 R5 G5 22 21 R11 G11 22 21 R17 G17 22 21 R23 G23 22
23 B5 R6 24 23 B11 R12 24 23 B17 R18 24 23 B23 R24 24
25 G6 B6 26 25 G12 B12 26 25 G18 B18 26 25 G24 B24 26

2.4 16 Groups Serial Mode

Only J1 and J5 works, output the same data, choose between, detailed definition as belows:

JI/J5
1 A B 2
3 OE LAT 4
5 CLK VCC 6
7 C D 8
9 R1 R2 10
11 R3 R4 12
13 GND R5 14
15 R6 R7 16
17 R8 R9 18
19 R10 GND 20
21 R11 R12 22
23 R13 R14 24
25 R15 R16 26

3. Serial decoding circuit

4. External interface definition

Colorlight i5A-907 Receiving Card control switch description

5. Power interface pin definition

6. Figure for receiving card size and hole position

Colorlight i5A-907 Receiving Card line diagram