Colorlight i9 Receiving Card

Colorlight i9 Receive Card is  part of  LED Display Control System. Colorlight i9 Receive Card is a high-end and universal receiver card.

Description

colorlight logo

Colorlight i9 Receiving Card

Colorlight i9 Receiving Card

i9 Receiving Card

Colorlight i9 Receive Card is  part of  LED Display Control System. Colorlight I9 Receive Card is a high-end and universal receiver card specially introduced in color flash, with a small size, with 67.6×35.46mm; Colorlight i9 Receiving Card uses DDR2 SODIMM interface to easily integrate into the line board or unit panel of the LED display, implement the LED display module High integration, which greatly promotes the design of the LED display unit and the structure.

Features

  • Tiny size: 67.6×35.46mm, DDR2 SODIMM interface, easy for maintenance
  • Supports HDR
  • Supports 32 sets of RGB signal parallel output
  • Loading capacity: 384*256 pixels
  • Supports brightness and chromaticity point-by-point calibration with 14bit accuracy
  • Improved grayscale performance at low brightness
  • Supports color temperature and gamut adjustment
  • Supports highlight and sorting
  • Seam compensation
  • Low latency
  • Fast upgrades and fast send out calibration coefficients
  • Supports smart module to save calibration coefficients and other information on module
  • Temperature, humidity, power supply voltage monitoring on cabinet and fan control
  • Supports LED point-by-point error detection of module
  • Supports LCD panel display
  • Supports dual card backup and dual power backup
  • Supports any scan mode from static to 64 scan
  • Supports any pumping point, and realize creative displays like shaped display, spherical display, etc.
  • Compatible with all series of Colorlight sending devices

Specifications

Control System Parameters
Sending Device All series of Colorlight sending devices
Capacity Full-color: 384*256 pixels
Network Port Exchange Supported, arbitrary use
Gray Level Maximum 65536 levels
Display Module Compatibility
Chip Supports PWM chips
Scan Type Supports any scan type from static to 64 scan
Module Specifications Support Supports 8192 pixels within any row, any column
Cable Direction Supports route from left to right, from right to left, from top to bottom, from bottom to top
Data Sets 32 sets of parallel RGB full color data, 64 sets of serial RGB data
Data Folded Supports 2~4 any discount to improve refresh rate
Data Exchange 32 sets of data any exchange
Module Snapshot Supports any pumping point
Compatible Device and Interface Type
Communication Distance UTP cable ≤ 140M

CAT6 cable ≤ 170M

Optic fiber transmission distance unrestricted

Compatible with Transmission Equipment Gigabit switch, fiber transceiver, optical switches
Size 67.6*35.46mm
Input Voltage DC 3.3V~6V
Rated Current 0.5A
Rated Power 2.5W
Storage and Transport Temperature -50℃~125℃
Operating Temperature -25℃~75℃
Body Static Resistance 2KV
Weight 9.5g
Monitoring Function (in conjunction with multi-function card)
Temperature Monitoring Cabinet temperature monitoring between -25℃~ 75℃

1 port for each card

Humidity Monitoring Receiver card humidity monitoring between 20% ~ 95%

1 port for each card

Bit Error Monitoring Monitors the total number of data packets and error packets to check network quality
Supply Voltage Monitoring 5 ports for supply voltage monitoring
Full Color LCD Display Panel Supported
Pixel Level Calibration
Brightness Calibration Supported
Chromaticity Calibration Supported
Other Features
Hot Backup Supports loop backup, dual sender backup, dual receiver card backup and dual power supply backup
Shaped Screen Supports various freeform display, spherical display, creative display, etc.
Program Backup Proprietary redundant firmware backup on card no matter how to use, upgrade, send parameters, continuous functionality

Hardware

1, Interface

S/N Name Function Remarks
1 Signal indicator light Flashes once per second Receiving card: normal working,

Network cable connection: normal

Flashes 10 times per second Receiving card: normal working,

Cabinet: Sorting & Highlight

Flashes 4 times per second Receiving card: Backing up senders(Loop Bcakup status)
2 Power indicator light The red indicator light shows that the power supply is normal
3 Fixed hole Used to reinforce the receiving card to improve vibration resistance
4 DDR interface Connects with display’s HUB board or unit plate From the diagram above, the left side of the guide plate is first pin (Viewing from the front of card)

2, Definition of Pins

Colorlight i9 Receiving Card Pin Circuit Link Example Diagram

Colorlight i9 Receiving Card Pin Circuit Link Example Diagram

3, Description of Pins

Instructions Definition Pin No. Definition Instructions
Ground Connection GND 1 2 D5V Power Supply
GND 3 4 D5V
GND 5 6 D5V
GND 7 8 D5V
GND 9 10 D5V
GND 11 12 D5V
Do not connect NC 13 14 NC Do not connect
Network port signal pin D2A+ 15 16 D1A+ Network port signal pin
D2A- 17 18 D1A-
NC 19 20 NC
D2B- 21 22 D1B-
D2B+ 23 24 D1B+
NC 25 26 NC
D2C+ 27 28 D1C+
D2C- 29 30 D1C-
NC 31 32 NC
D2D- 33 34 D1D-
D2D+ 35 36 D1D+
Do not connect NC 37 38 NC Do not connect
Ground connection GND 39 40 GND Ground connection
Button test / Work indicator light LED_BTN_IND 41 42 A Display control:

1, ABCDE for row decoding signal

2, LED_LAT for signal lock

3, LED_OE for independent clock

Temperature monitoring LED_TEMP 43 44 B
Humidity monitoring LED_HUM 45 46 C
Fan output LED_FAN 47 48 D
Blanking LED_CTRL 49 50 E
Serial clock LED_SCLK 51 52 LED_LAT
LED_SCLK_S 53 54 LED_OE
Ground connection GND 55 56 GND Ground connection
RGB output RI 57 58 R2 RGB output
G1 59 60 G2
B1 61 62 B2
R3 63 64 R4
G3 65 66 G4
B3 67 68 B4
R5 69 70 R6
G5 71 72 G6
B5 73 74 B6
R7 75 76 R8
G7 77 78 G8
B7 79 80 B8
R9 81 82 R10
G9 83 84 G10
B9 85 86 B10
R11 87 88 R12
G11 89 90 G12
B11 91 92 B12
R13 93 94 R14
G13 95 96 G14
B13 97 98 B14
R15 99 100 R16
G15 101 102 G16
B15 103 104 B16
Ground connection GND 105 106 GND Ground connection
GND 107 108 GND
RGB output R17 109 110 R18 RGB output
G17 111 112 G18
B17 113 114 B18
R19 115 116 R20
G19 117 118 G20
B19 119 120 B20
R21 121 122 R22
G21 123 124 G22
B21 125 126 B22
R23 127 128 R24
G23 129 130 G24
B23 131 132 B24
R25 133 134 R26
G25 135 136 G26
B25 137 138 B26
R27 139 140 R28
G27 141 142 G28
B27 143 144 B28
R29 145 146 R30
G29 147 148 G30
B29 149 150 B30
R31 151 152 R32
G31 153 154 G32
B31 155 156 B32
Ground connection GND 157 158 GND Ground connection
Smart module LED_SPI_SCK 159 160 LED_SPI_SDI Smart module
LED_SPI_CS1 161 162 LED_SPI_CS2
LED_SPI_SDO1 163 164 LED_SPI_SDO2
LED_SPI_CS3 165 166 LED_SPI_CS4
LED_SPI_SDO3 167 168 LED_SPI_SDO4
LED_SPI_CS5 169 170 LED_SPI_CS6
LED_SPI_SDO5 171 172 LED_SPI_SDO6
LED_SPI_CS7 173 174 LED_SPI_CS8
LED_SPI_SDO7 175 176 LED_SPI_SDO8
Power supply monitoring LED_PWR1 177 178 NC Reserved
LED_PWR2 179 180 NC
LED_PWR3 181 182 NC
LED_PWR4 183 184 NC
LED_PWR5 185 186 NC
Reserved NC 187 188 RCV_BK1 Dual card backup
NC 189 190 RCV_BK2
LCD screen interface UART_TXD 191 192 LED_RED LED RGB indicator
UART_RXD 193 194 LED_GREEN
Reserved NC 195 196 LED_BLUE
NC 197 198 NC Reserved
Ground connection GND 199 200 GND Ground connection