Description
Colorlight i9 plus Receiving Card
i9 plus Receiving Card
Colorlight i9 plus Receiving Card is part of LED Display Control System. Colorlight i9 plus Receiving Card is a high-end and universal receiver card specially introduced in color flash, with a small size, with 63 * 33mm; it uses DDR2 SODIMM interface to easily integrate into the line board or unit panel of the LED display, implement the LED display module High integration, which greatly promotes the design of the LED display unit and the structure.
Features
- Supports 32 sets of RGB signal parallel output
- Loading capacity: 512×384 pixels
- Supports HDR
- Low latency
- Supports brightness and chromaticity point-by-point calibration
- Supports better gray at low brightness
- Supports color temperature adjustment
- Supports color gamut adjustment
- Seam compensation
- Support any pumping row, pumping column and pumping point
- Supports smart module to save calibration coefficients and other information on module
- Temperature, humidity, power supply control voltage monitoring on cabinet and fan control
- Supports network cable status monitoring
- Supports any scan type from static to 64 scan
- Wide working voltage range with DC 3.3~6V.
- Compatible with all series of Colorlight sending devices
Specification
| Control System Parameters | |
| Sending Device | All series of Colorlight sending devices |
| Control Area of Every Card | Full-color: 512×384 pixels |
| Network Port Exchange | Supported, arbitrary use |
| Gray Level | Maximum 65536 levels |
| Display Module Compatibility | |
| Chip Supports | PWM chips |
| Scan Type | Supports any scan type from static to 64 scan |
| Module Specifications Support | Supports16384 pixels within any row, any column |
| Cable Direction | Supports route from left to right, from right to left, from top to bottom, from bottom to top |
| Data Sets | 32 sets of parallel RGB full color data, 64 sets of serial RGB data |
| Data Folded | Supports 2~8 any discount to improve refresh rate |
| Data Exchange | 32 sets of data any exchange |
| Module Snapshot | Supports any pumping point |
| Compatible Device and Interface Type | |
| Communication Distance | UTP cable≤140M；CAT6 cable≤170M；Optic fiber transmission distance unrestricted |
| Compatible with Transmission Equipment | Gigabit switch, fiber transceiver, optical switches |
| Size | 67.6×35.5mm |
| Input Voltage | DC 3.3V~6V |
| Rated Current | 0.5A |
| Rated Power | 2.5W |
| Storage and Transport Temperature | -50℃~125℃ |
| Operating Temperature | -25℃~75℃ |
| Body Static Resistance | 2KV |
| Weight | 9.5g |
| Monitoring Function | |
| Temperature Monitoring | Cabinet temperature monitoring between -25℃~75℃
1 port for each card |
| Humidity Monitoring | Receiver card humidity monitoring between 20%~95% RH
1 port for each card |
| Bit Error Monitoring | Monitor the total number of data packets and error packets to check network quality |
| Supply Voltage Monitoring | 4 ports for supply voltage monitoring |
| Full Color LCD Display Panel | Supported |
| Multi-function card | Monitoring cabinet door, fan and smoke when in conjunction with M3 |
| Pixel Level Calibration | |
| Brightness Calibration | Supported |
| Chromaticity Calibration | Supported |
| Other Features | |
| Hot Backup | Supports loop backup, dual receiver card backup and dual power supply backup |
| Shaped Screen | Supports various freeform display, spherical display, creative display, etc. through the data arbitrary offset |
Interface
