Colorlight i5A-905 Receiving Card

Description

Features

• Tiny size, special designed for the compact structure designs, like color screen and casting aluminum cabinet.
• Power supply from pin board without the need of external power supply, enhance hardware stability.
• New processing core, perfect in display effect.
• High refresh rate, high gray scale and high brightness with conventional chips.
• Perfect performance under lower grayscale status.
• Better detail processing: Partial dark at row, reddish at low gray, shadow problems can be solved.
• Support the effective display at first grayscale value.
• Support 14 bits high-precision point-by-point calibration in the Brightness and chromaticity.
• Support conventional chips, PWM chips and lighting chips, etc.
• Support any scan mode from static to 1/32 scan.
• Support any pumping point and data arbitrary offset, and realize various freeform display, spherical display, diamond display, creative display, etc.
• Support 16 groups of RGBR’ signal output and 24 groups of RGB in maximum.
• Large load capacity.
• Advanced design, high quality components, rigorous aging test, zero malfunction of final products.
• Wide working voltage range with DC3.3 -6V
• Support dual receiving card backup, loop backup, and dual-machine backup, etc.
• Compatible with Gigabit NIC, S series Sender, Z series Sender and C series Sender, etc.

Specifications

Control system parameters
Sending device	Gigabit NIC, S series Sender, Z series Sender and C Series Sender, etc.
Control area of every card	Full-color: 256*256 Pixels, and for special applications the column can be extended to 1024 pixels.
Calibration area of every card	256*256 pixels
Cascade control area of the largest regional	65536*65536 pixels
Cascade card number	65536 PCS
Network port exchange	Support, arbitrary use
Synchronization	Nanosecond synchronization between cards
Display Quality
Refresh rate for conventional chip	Static: 64*64, up to 16000Hz 1/8 scan: 128*128, up to 10000Hz
Serial frequency	0.2MHz-41.7MHz
Gray Level	Maximum 65536 levels
Minimum unit of OE values	8ns, 8ns multiples steps
Blanking Circuit	Support CD4051 blanking circuit
Gray scale compensation	Each level grayscale compensate separately
Display module compatibility
Chip supports	Support conventional chips, PWM chips, lighting chips and other mainstream chips
PWM chip supports	Support hundreds of different specifications of the PWM chip, such as MBI, MY, SUM, etc.
Scan mode	Conventional mode and high refresh rate mode to support refresh rate multiplied
Scan type	Support static sweep to 1/32 scan
Module specifications support	Support 4096 pixels within any row, any column
The direction of the cable	Support route from left to right, from right to left, from top to bottom, from bottom to top
Data sets	Different sets in different work modes, refer to interface definitions
Data folded	Support to fold on the same or opposite direction, which improve refresh rate significantly
Module snapshot	Support any pumping point
Data serial transmission	RGB, R8G8B8, R16G16B16, etc.
Compatible device and interface type
Communication distance	UTP cable≤140M CAT6 cable≤170M Optic fiber: Single Mode Fiber Transceiver≤20KM Multi-Mode Fiber Transceiver ≤550M (Use RP Repeater to extend unlimited)
Compatible with transmission equipment	Gigabit switch, fiber transceiver, optical switches
DC power interface	Wire terminal or HUB board
HUB interface type	Refer to signal interface definition below
Physical parameters
Size	137* 48mm
Input voltage	DC 3.3V-6V
Rated current	0.6A
Rated power	3W
Storage and transport temperature	-50℃ to 125℃
Operating temperature	-25℃ to 75℃
Body static resistance	2KV
Weight	70g
Monitoring function (in conjunction with multi-function card)
Monitoring functions	Real time monitoring environment information like temperature, humidity, smoke
Remote control	Support for relay switch to turn on/off the power supply of equipment remotely
Pixel level calibration
Brightness calibration	Support
Chromaticity calibration	Support
Other features
Dual Receiving Card Backup	Support one cabinet with two receiving card. Consult our technicians for more details
Hot backup	Support loop backup and dual-machine backup
Shaped screen	Support various freeform display, spherical display, creative display, etc. through the data arbitrary offset

Hardware

No.	Name	Function	Remarks
1	Network port A	RJ45，for transmitting data signals	The dual network ports can achieve import/export at random, which can be identified in an intelligent way by the system
2	Network port B	RJ45，for transmitting data signals
3	Temp	For temperature detection
4	External interfaces	For Indicator light and test button
5	Indicator Light	For power indicator light and signal transmission status	Red for power Green for signal
6	Test Button	The attached test procedures can achieve four kinds of monochrome display (red, green, blue and white), as well as horizontal, vertical and other display scan modes
7	signal output J1	Connect to the LED module, interface definition shown below
8	signal output J2	Connect to the LED module, interface definition shown below
9	Power	Connect DC3.3~6V power supply for the receiving card
10	HUMI	For humidity detection

2. Interface definition

The Colorlight i5A-905 Receiving Card has two 60P data output interfaces. i5A-905 Receiving card supports 3 different working modes, each mode has different  interface definitions of the 60P outputs, which list as follows:

2.1 Standard mode：

Support 1/32 scanning，16 groups RGBR’ data parallel output.

J1					J2
definition	pin	pin	definition		definition	pin	pin	definition
C	1	2	A		C	1	2	A
B	3	4	OE		B	3	4	OE
LAT	5	6	CLK		LAT	5	6	CLK
D	7	8	E		D	7	8	E
R1	9	10	G1		R9	9	10	G9
R1′	11	12	B1		R9′	11	12	B9
GND	13	14	R2		GND	13	14	R10
G2	15	16	R2′		G10	15	16	R10′
B2	17	18	R3		B10	17	18	R11
G3	19	20	GND		G11	19	20	GND
R3′	21	22	B3		R11′	21	22	B11
R4	23	24	G4		R12	23	24	G12
R4′	25	26	B4		R12′	25	26	B12
x	27	28	x		x	27	28	x
x	29	30	VCC		x	29	30	VCC
C	31	32	A		C	31	32	A
B	33	34	OE		B	33	34	OE
LAT	35	36	CLK		LAT	35	36	CLK
D	37	38	E		D	37	38	E
R5	39	40	G5		R13	39	40	G13
R5′	41	42	B5		R13′	41	42	B13
GND	43	44	R6		GND	43	44	R14
G6	45	46	R6′		G14	45	46	R14′
B6	47	48	R7		B14	47	48	R15
G7	49	50	GND		G15	49	50	GND
R7′	51	52	B7		R15′	51	52	B15
R8	53	54	G8		R16	53	54	G16
R8′	55	56	B8		R16′	55	56	B16
x	57	58	x		x	57	58	x
x	59	60	VCC		x	59	60	VCC

2.2 Output 24 groups mode：

Support 1/32 scanning，24 groups RGB data parallel output.

J1					J2
definition	pin	pin	definition		definition	pin	pin	definition
C	1	2	A		C	1	2	A
B	3	4	OE		B	3	4	OE
LAT	5	6	CLK		LAT	5	6	CLK
D	7	8	E		D	7	8	E
CTRL1/NC	9	10	R1		CTRL1/NC	9	10	R13
G1	11	12	B1		G13	11	12	B13
GND	13	14	R2		GND	13	14	R14
G2	15	16	B2		G14	15	16	B14
R3	17	18	G3		R15	17	18	G15
B3	19	20	GND		B15	19	20	GND
R4	21	22	G4		R16	21	22	G16
B4	23	24	R5		B16	23	24	R17
G5	25	26	B5		G17	25	26	B17
R6	27	28	G6		R18	27	28	G18
B6	29	30	VCC		B18	29	30	VCC
C	31	32	A		C	31	32	A
B	33	34	OE		B	33	34	OE
LAT	35	36	CLK		LAT	35	36	CLK
D	37	38	E		D	37	38	E
CTRL1/NC	39	40	R7		CTRL1/NC	39	40	R19
G7	41	42	B7		G19	41	42	B19
GND	43	44	R8		GND	43	44	R20
G8	45	46	B8		G20	45	46	B20
R9	47	48	G9		R21	47	48	G21
B9	49	50	GND		B21	49	50	GND
R10	51	52	G10		R22	51	52	G22
B10	53	54	R11		B22	53	54	R23
G11	55	56	B11		G23	55	56	B23
R12	57	58	G12		R24	57	58	G24
B12	59	60	VCC		B24	59	60	VCC

2.3 Output 28 groups mode：

Support 1/8 scanning, 28 groups RGB parallel output；As for 1/8~1/32, there need a serial decoding circuit shown as below.

J1					J2
definition	pin	pin	definition		definition	pin	pin	definition
C	1	2	A		C	1	2	A
B	3	4	OE		B	3	4	OE
LAT	5	6	CLK		LAT	5	6	CLK
R1	7	8	G1		R15	7	8	G15
B1	9	10	R2		B15	9	10	R16
G2	11	12	B2		G16	11	12	B16
GND	13	14	R3		GND	13	14	R17
G3	15	16	B3		G17	15	16	B17
R4	17	18	G4		R18	17	18	G18
B4	19	20	GND		B18	19	20	GND
R5	21	22	G5		R19	21	22	G19
B5	23	24	R6		B19	23	24	R20
G6	25	26	B6		G20	25	26	B20
R7	27	28	G7		R21	27	28	G21
B7	29	30	VCC		B21	29	30	VCC
C	31	32	A		C	31	32	A
B	33	34	OE		B	33	34	OE
LAT	35	36	CLK		LAT	35	36	CLK
R8	37	38	G8		R22	37	38	G22
B8	39	40	R9		B22	39	40	R23
G9	41	42	B9		G23	41	42	B23
GND	43	44	R10		GND	43	44	R24
G10	45	46	B10		G24	45	46	B24
R11	47	48	G11		R25	47	48	G25
B11	49	50	GND		B25	49	50	GND
R12	51	52	G12		R26	51	52	G26
B12	53	54	R13		B26	53	54	R27
G13	55	56	B13		G27	55	56	B27
R14	57	58	G14		R28	57	58	G28
B14	59	60	VCC		B28	59	60	VCC

2.4 Output 64 serial mode:

Support 1/32 scan, 32 groups serial data output for each interface, 64 groups in all, definitions as below:

J1					J2
definition	pin	pin	definition		definition	pin	pin	definition
C	1	2	A		C	1	2	A
B	3	4	OE		B	3	4	OE
LAT	5	6	CLK		LAT	5	6	CLK
D	7	8	E		D	7	8	E
CTRL1/NC	9	10	R1		CTRL1/NC	9	10	R33
R2	11	12	R3		R34	11	12	R35
GND	13	14	R4		GND	13	14	R36
R5	15	16	R6		R37	15	16	R38
R7	17	18	R8		R39	17	18	R40
R9	19	20	GND		R41	19	20	GND
R10	21	22	R11		R42	21	22	R43
R12	23	24	R13		R44	23	24	R45
R14	25	26	R15		R46	25	26	R47
R16	27	28	x		R48	27	28	x
x	29	30	VCC		x	29	30	VCC
C	31	32	A		C	31	32	A
B	33	34	OE		B	33	34	OE
LAT	35	36	CLK		LAT	35	36	CLK
D	37	38	E		D	37	38	E
CTRL1/NC	39	40	R17		CTRL1/NC	39	40	R49
R18	41	42	R19		R50	41	42	R51
GND	43	44	R20		GND	43	44	R52
R21	45	46	R22		R53	45	46	R54
R23	47	48	R24		R55	47	48	R56
R25	49	50	GND		R57	49	50	GND
R26	51	52	R27		R58	51	52	R59
R28	53	54	R29		R60	53	54	R61
R30	55	56	R31		R62	55	56	R63
R32	57	58	x		R64	57	58	x
x	59	60	VCC		x	59	60	VCC

 

2.5 Serial decoding circuit

3. External interface definition

4. Power interface pin definition

5. Figure for receiving card size and hole position