Colorlight N0 Mini Receiving Card

Colorlight N3 Mini Receiving Cardcolorlight K5 plus Receiving Card

N0 is a mini receiving card developed by Colorlight for lighting screens. N0 adopts a small-sized hardware design and its size is 85×12mm, suitable for light bar screens, net screens, dot lights and special-shaped screens. It can effectively save space and reduce the difficulty in designing screen structure. The N0 receiving card can be widely applied in such scenarios as urban beautification, landscape lighting, and shopwindow dressing.

Add to wishlist

Description

Description

colorlight logo

Colorlight N0 Mini Receiving Card

Version	Release Date	Description
V1.0	2020-06-30	First release.

Colorlight N0 Mini Receiving Card Features

Loading capacity: 512 pixels
Supports 2 sets of RGB data serial output and signal extension
Supports static and 1/2 scan
Supports firmware backup and safe firmware upgrade
Support loop backup
Supports arbitrary offset of data group
Supports the display image of single card to rotate 90, 180 or 270 degrees so as to achieve the display of special-shaped screen
Signal transmission requires only 2 core twisted pair, and the peripheral cascade connection line supports going from one input to one output
Fully enclosed design, effectively shielding electromagnetic wave, allowing the display to pass EMI testing
Compatible with the relay card of Colorlight

Specifications

Hardware Specification
Loading Capacity	512 pixels
Refresh Rate	Static: more than 5000Hz
Data Group	2 groups of RGB serial data, supporting signal extension
Communication Interface	2×P2.0, with no distinction between input and output, supporting loop backup
Online Upgrade	Supports safe upgrade
Scan Type	Static, 1/2 scan
Number of Cascading cards	General: 128, maximum: 256
Gray Level	4096-65536 (The value depends on the driver IC)
Supported Chips	Conventional chips, PWM chips, lighting chips
Special-shaped Display	Supports arbitrary offset of data group and image rotation
Physical Parameters
Operating Voltage	DC 3.6V-5.5V
Operating Current	0.25A
Operating Environment	-20℃~75℃, 0%RH~90%RH, non-condensing
Size	85mm×12mm
Weight	5g

Hardware

No.	Name	Function
1	Interface Type	2×P2.0, for transmitting network signals, with no distinction between input and output
2	Data Interface	Used for power supply, outputting data and control signals such as CLK, LE and OE

Definition of Pins

1）1 set of RGB serial data mode.

J1
Instruction	Definition	Pin No.		Definition	Instruction
Ground Connection	GND	2	1	GND	Ground Connection
Latch	LE	4	3	OE	Output Enable
Data	DATA	6	5	CLK	Clock
Row Decoding	B	8	7	A	Row Decoding
Power Supply	VCC	10	9	VCC	Power Supply

2）2 sets of RGB serial data mode.

J1
Instruction	Definition	Pin No.		Definition	Instruction
Ground Connection	GND	2	1	GND	Ground Connection
Latch	LE	4	3	OE	Output Enable
Data	DATA1	6	5	CLK	Clock
Data	DATA2	8	7	A	Row Decoding
Power Supply	VCC	10	9	VCC	Power Supply

Statement

Thank you for purchasing the product of Colorlight (Shenzhen) Cloud Technology Co., Ltd. If you encounter any problems during use or have any suggestions, please contact us through official channels. We will do our best to provide support and listen to your valuable suggestions. We will constantly make improvements on technical specifications but without notice. You can visit www.colorlightinside.com to get more updated information.